Features and Applications

Indoor and outdoor use.

Very fine texture.

Water resistant.

Resistant to cracking and external wear.

Substrates

Empty joints must be dry and clean throughout their entire length and depth.

Repointing must be carried out at least 24 hours after gluing for vertical cladding and 48 hours after gluing for coverings.

Instructions

Add water and mix manually or mechanically until a consistent (not liquid) paste is obtained.

Let the mixture rest for 5 minutes and mix again.

For smaller areas, fill the joints with a rubber trowel or a refillable gun, compacting the material well.

Apply diagonally to the joints, applying pressure and removing excess material.

Let the material dry slightly for approximately 20 to 30 minutes. When the paste becomes opaque, clean the surface with a slightly damp, hard sponge.

Once the product has hardened in the joint, smooth the surface with a clean, dry cloth to remove any remaining dust.

Let dry for at least 24 hours. Before normal transit

If the ceramic remains stained, use kindouch to clean it (only if the product does not damage the ceramic), avoiding touching the joints (see product instructions).

Precautions and Recommendations

Do not use below 5°C or above 30°C.

Do not use in areas where there is a risk of frost, rain, strong winds, or direct sunlight.

Do not use on expansion joints or construction joints in general.

Fill joints when the coating is completely dry.